Lzzbj-24 Indoor Single Phase Epoxy Resin Integral | RFQ Sourcing Details

The current transformer primary winding and secondary winding. The ringcore and coil are encapsulated in epoxy resin cast insulator, pillar structure is fullyenclosed, with excellent insulation properties and moisture resistance. Can be wetor surface condensation and two filihy conditions under normal operation.

lscharacterized by dynamic multiple secondary output capacity, accurate coeficientis higher than similar products. Insulation performance and stability. Structure and Feature The Type Voltage Transformer is of epoxy resin, hermetically sealed structure with excellent insulative performance and anti-damp capacity.

It has outling and easily-cleaned surface. Secondary outlet terminal is equipped with connection terminal box. Upside and profile of the box have a hole respectively. The two holes together with outlet terminal are for leading out. Four holes at the bottom of the PT are suitable for mounting.

Rated secondary current: 5A or 1A. Insulation level: 40.5/95/185kV. The current transformer has epoxy resin cast fully enclosed structure. Applies to the rated voltage of 35kV and below. Rated frequency of 50. Hz indoorpower line and its equipment current.

Energy measurement and protection.Transformer is also known as the utility Transformer, is the current Transformer and voltage transformer collectively. Can turn high voltage into low voltage, large current into small current, used to measure or protect the system.

Its main function is to convert high or large current into standard low voltage(100V) or standard small current(5A or 1A) in proportion so as to standardize and miniaturize measuring instruments, protective equipment and automatic control equipment.

At the same time, the transformer can also be used to separate the high voltage system to ensure the safety of the person and equipment. In power lines, the current difference from a few to a few thousand, voltage difference from several volts to several million volts.

The current voltage in the line is high, so it is very dangerous to measure directly. To facilitate the conversion of the secondary instrument to a uniform current voltage, the Transformer is used to change current pressure and isolate electricity.

The instruments are mostly needle-type current voltmeters, so the secondary current of the current Transformer is mostly amped-grade(E. G. 5). With the development of the times, most of the power measurements have reached the digital, and the computer sampling signal is usually mA(0-5V, 4-20mA, etc.).

The secondary current of the micro current Transformer is milliampere, which acts as a bridge between the large Transformer and the sample. The miniature current Transformer is called the "current Transformer for equipment".

(`` Instrument Current Transformer "has a meaning that is used in laboratories for multicurrent than precise current Transformers, generally used to extend the meter range.

Type Rated primary current Accuracy class Rated output Short-time thermal current Rated Dynamic current 0.2S 0.5 5P15 5P20 LZZBJ9-35/250W1 20~100 0.2S/0.2S 0.2S/0.5 0.2S/5P15 0.5/5P20 0.2S/0.5/5P I1n/1s 225I1n 150~200 300~500 600~ I1n/4s 110I1n 1500~ LZZBJ9-35/250W2 20~100 0.2S/0.5/5P20 0.2S/5P15/5P20 0.5/5P15/5P20 0.2S/0.5/5P20/5P I1n/1s 225I1n 150~200 300~500 600~ I1n/4s 110I1n 1500~ Main Product