PEC-S-5000/35/0.4 5000 kVA Three-Phase Cast Resin | RFQ Sourcing Details
Distribution Transformers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Distribution Transformers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The PEC-S-5000/35/0.4 is a three-phase, two-winding cast resin dry-type distribution transformer with a listed rated capacity of 5000 kVA.
Its stated electrical configuration is 35 kV on the high-voltage side and 0.4 kV on the low-voltage side, with 50/60 Hz frequency capability, a Dyn11 vector group, and a listed impedance range of 4–6%. The transformer uses a core-type design with silicon-steel core material and AN/AF cooling.
The listed tapping range is +2 × 2.5% / −2 × 2.5%, and the stated temperature rise is 125 K. Construction information identifies cast resin dry-type insulation and lists IEC 60076-11 as the applied standard. Available enclosure selections are stated as IP00, IP20, IP23, or a customized configuration.
Fans and an enclosure are listed as optional accessories. Several details require confirmation before procurement. One specification identifies copper windings, while another states that aluminum or copper may be used;buyers should therefore specify the required conductor material in the purchase documentation.
The exact high- and low-voltage ratings may also be customized, so the final ratio, tapping arrangement, insulation levels, and terminal configuration should be documented for the intended system.
Buyers should request a project-specific technical schedule confirming rated voltages, frequency, impedance tolerance, vector group, cooling mode, enclosure rating, conductor material, accessories, and applicable test documentation.
They should also confirm whether the unit will be used to step voltage up or down within the proposed installation, since that depends on system design and connection.
Installation environment, load profile, protection coordination, cable interfaces, site altitude, ambient conditions, footprint, weight, shipping dimensions, production schedule, and warranty terms should all be agreed before ordering.
PEC-S-5000 | Applications and Buyer Notes
PEC-S-5000 is organized as a sourcing-ready Distribution Transformers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-t
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Distribution TransformersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- PEC-5000/35/0.4Based on visible page data; confirm exact value in the RFQ.
- Phase
- Three-phaseBased on visible page data; confirm exact value in the RFQ.
- Core type
- Core-typeBased on visible page data; confirm exact value in the RFQ.
- Frequency
- 50/60 HzBased on visible page data; confirm exact value in the RFQ.
- Impedance
- 4–6%Based on visible page data; confirm exact value in the RFQ.
- Product type
- Cast resin dry-type distribution transformerBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Dry Type Transformer For Solar Power Systems 100kva And Solar Power SystemsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Epoxy Resin Indoor Electric Single Phase Potential Transformer PtThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Power Supply Ring Main Unit Cable Accessories Ceramic Metal Silicone Rubber Epoxy Resin BushingThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10p10 500 5a Split Core Ct Current TransformerThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv 12kv 20kv 24kv Electrical Power Transmission Medium Voltage Air Insulated SwitchgearThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv 12kv Medium Voltage Distribution Air Insulated SwitchgearThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv 12kv Medium Voltage Sis Solid Insulation Compact Modular SwitchgearThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 150kva 20kv Dry Type Transformer With Low Loss Ce Low Loss And CeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 23kv Oil Filled Ansi Standard Power Transformer Bay O Net B O N Inline Link Auto Electrical ThermaThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cables Busbar And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Meters And Protection Devices categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Switchgear And Breakers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Transformers And Substation Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
35/0.4 kV Three-Phase European-Style Prefabricated Compact Substation with Cast-Coil Dry-Type TransfRequest Quote
34.5 kV/0.418 kV 2500 kVA Three-Phase Pad-Mounted Oil-Immersed Distribution TransformerRequest Quote
S11/S13 Three-Phase Oil-Immersed Distribution Transformer, 30–2500 kVARequest Quote
100–315 kVA Three-Phase Copper-Wound Oil-Immersed Distribution TransformerRequest Quote
Ville Sz22-16000/ kVA 38.5kv Three Phase Oil Immersed on Load Tap Changing Power TransformeRequest Quote
Sz22-20000/ kVA 38.5kv Three Phase Oil Immersed on Load Tap Changing Power Transformer OnanRequest QuotePowerGridSource related sourcing paths
PowerGridSource procurement phrases
PowerGridSource related product samples
Split core current transformer LMZK1-10 series LMZK series split-core current transformers are suitable for the current ...
Distribution Transformers 150kVA 20kv Dry Type Transformer with Low Loss CE - Low Loss and CEWhat we can do ? 150kVA 20kV Dry Type Transformer with Low Loss CE We are a professional manufacturer focusing on oil im...
Distribution Transformers Schneider Three Phase Power Frequency Amorphous Core Energy Saving Compact Substation - Three PhaseWhat we can do ? We are a professional manufacturer focusing on oil immersed power & distribution transformers with volt...
Distribution Transformers 630kVA 35kv Dry Type Transformer with UL - 630kVA and 35kv Dry Type TransformerWhat we can do ? 150kVA 0.4kV Dry Type Transformer with High Efficiency ISO We are a professional manufacturer focusing ...
Distribution Transformers 100kVA 10kv Dry Type Transformer for Solar Power Systems - 100kVA and Solar Power SystemsWhat we can do ? 100kVA 10kV Dry Type Transformer for Solar Power Systems We are a professional manufacturer focusing on...
Distribution Transformers High Precision Residual Current Transformer for Smart Meters - High Accuracy Transformer and Smart EThe residual current transformer is mainly used to detect all devices in the distribution circuit that pass through the ...