Three-Phase Hermetically Sealed Oil-Immersed Dist | RFQ Sourcing Details
Distribution Transformers · 500–2500 kVA · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Distribution Transformers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This three-phase hermetically sealed oil-immersed transformer is intended for power-distribution duties. The stated capacity range is 500–2500 kVA, with listed high-voltage ratings of 6, 10, 11, 13.2, 13.8, 20, 33, and 35 kV. The low-voltage side is listed as 0.415 kV or customizable.
Its published configuration includes two windings, ONAN cooling, a 4–6% impedance-voltage range, and 50/60 Hz frequency options. The standard product data identifies a silicon-steel core and lists copper or aluminum as winding-material options.
Published connection information includes Dyn11, while the broader parameter listing also mentions Yyn0. The tapping range is stated as ±2 × 2.5%, with customization available. Temperature-rise data is listed as 60/65 K.
Lightning-impulse and AC-withstand levels are described as being in accordance with the applicable IEC requirements rather than as fixed values. The design references IEC 60076. The source information also lists CE, UL, and KEMA documentation for the transformer product line.
Buyers should request the exact certificate or test-report scope for the proposed model, rating, insulation system, and destination market before treating any approval as applicable to a specific order.
Before procurement, confirm the required kVA rating, primary and secondary voltages, system frequency, vector group, impedance, tap arrangement, winding conductor, insulating-liquid type, temperature-rise requirement, and applicable dielectric test levels.
Also establish the outdoor installation conditions, enclosure and ingress-protection requirements, site altitude and ambient temperature, terminal arrangement, accessories, losses, efficiency, sound level, dimensional drawing, total mass, inspection plan, and required routine or type-test documentation.
Packaging is listed as a wooden pallet or wooden case, but final packing dimensions, shipment weight, production schedule, warranty, and commercial terms should be confirmed for the selected configuration.
Three-Phase | Applications and Buyer Notes
Three-Phase is organized as a sourcing-ready Distribution Transformers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Distribution TransformersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Capacity
- 500–2500 kVABased on visible page data; confirm exact value in the RFQ.
- Frequency
- 50 Hz or 60 HzBased on visible page data; confirm exact value in the RFQ.
- Packaging
- Wooden pallet or wooden caseBased on visible page data; confirm exact value in the RFQ.
- Application
- Power distributionBased on visible page data; confirm exact value in the RFQ.
- Product type
- Three-phase hermetically sealed oil-immersed distribution transformerBased on visible page data; confirm exact value in the RFQ.
- Vector group
- Dyn11;Yyn0 also listed among available parametersBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cables Busbar And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Meters And Protection Devices categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Switchgear And Breakers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Transformers And Substation Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Ip65 Switchgear Panels sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100 315 Kva Three Phase Copper Wound Oil Immersed Distribution TransformerThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv Distribution Transformers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Electrical Equipment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Cast Resin Dry Type Transformer Ul Certified 10kv Cast Resin And Ul CertifiedThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Dry Type Transformer For Solar Power Systems 100kva And Solar Power SystemsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Epoxy Resin Indoor Electric Single Phase Potential Transformer PtThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
S13 Three-Phase Hermetically Sealed Oil-Immersed Distribution Transformer, 6.6–11 kVRequest Quote
Three-Phase 13.8 kV 1000 kVA Oil-Immersed Pad-Mounted Distribution TransformerRequest Quote
34.5 kV/0.418 kV 2500 kVA Three-Phase Pad-Mounted Oil-Immersed Distribution TransformerRequest Quote
700 kVA 11 kV/420 V Three-Phase Oil-Immersed Distribution TransformerRequest Quote
Hairui S11 Three-Phase Sealed Oil-Immersed Distribution TransformerRequest Quote
S11 Three-Phase Oil-Immersed Power and Distribution TransformerRequest QuotePowerGridSource related sourcing paths
PowerGridSource procurement phrases
PowerGridSource related product samples
Split core current transformer LMZK1-10 series LMZK series split-core current transformers are suitable for the current ...
Distribution Transformers 150kVA 20kv Dry Type Transformer with Low Loss CE - Low Loss and CEWhat we can do ? 150kVA 20kV Dry Type Transformer with Low Loss CE We are a professional manufacturer focusing on oil im...
Distribution Transformers Schneider Three Phase Power Frequency Amorphous Core Energy Saving Compact Substation - Three PhaseWhat we can do ? We are a professional manufacturer focusing on oil immersed power & distribution transformers with volt...
Distribution Transformers 630kVA 35kv Dry Type Transformer with UL - 630kVA and 35kv Dry Type TransformerWhat we can do ? 150kVA 0.4kV Dry Type Transformer with High Efficiency ISO We are a professional manufacturer focusing ...
Distribution Transformers 100kVA 10kv Dry Type Transformer for Solar Power Systems - 100kVA and Solar Power SystemsWhat we can do ? 100kVA 10kV Dry Type Transformer for Solar Power Systems We are a professional manufacturer focusing on...
Distribution Transformers High Precision Residual Current Transformer for Smart Meters - High Accuracy Transformer and Smart EThe residual current transformer is mainly used to detect all devices in the distribution circuit that pass through the ...