S11 Three-Phase Oil-Immersed Power and Distributi | RFQ Sourcing Details
Distribution Transformers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Distribution Transformers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This S11 core-type transformer is a three-phase, two-winding oil-immersed unit intended for power and distribution service. The supported product information lists copper as the material and identifies power-frequency operation.
Available configurations include high-voltage ratings of 33 kV or 35 kV with listed secondary voltages such as 11 kV, 10 kV, 6.6 kV, 415 V, 400 V, 380 V, and 0.4 kV. Rated voltage can be customized.
The listed family includes capacities from 15 kVA through 10 MVA, while the accompanying performance table also presents selected configurations up to 20,000 kVA. Depending on the rating, listed connection symbols include Dyn11, Yyn0, Yd11, and Ynd11.
High-voltage tapping ranges shown in the data include ±5% and ±2 × 2.5%. Heat-dissipation arrangements may use corrugated sheet or sheet radiators.
Supported construction details include a core made from cold-rolled grain-oriented silicon steel sheet, a 45-degree full-oblique-joint structure, and a round core cross-section. The states low loss, low noise, low partial discharge, low temperature rise, and resistance to short-circuit forces.
Outdoor service conditions are listed for elevations up to 1,000 m, with ambient temperatures from -25°C to +40°C. A special minimum temperature of -45°C and installations above 1,000 m are referenced as conditions to . The mounting environment is specified as free from corrosive gas and obvious dirt.
Before procurement, the buyer should confirm the exact capacity, primary and secondary voltage, tap-changing method, tapping range, connection group, short-circuit impedance, loss values, temperature-rise requirements, dimensions, total weight, oil weight, installation altitude, ambient-temperature range, and required accessories.
The buyer should also request the configuration-specific technical schedule and confirm whether an off-circuit or on-load tap changer is required. Any required certification edition, inspection documentation, testing scope, packing details, delivery terms, and warranty should be confirmed for the ordered unit.
S11 | Applications and Buyer Notes
S11 is organized as a sourcing-ready Distribution Transformers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Distribution TransformersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Model
- S11Based on visible page data; confirm exact value in the RFQ.
- Application
- Power and distribution transformer serviceBased on visible page data; confirm exact value in the RFQ.
- Core material
- Cold-rolled grain-oriented silicon steel sheetBased on visible page data; confirm exact value in the RFQ.
- Winding material
- CopperBased on visible page data; confirm exact value in the RFQ.
- Listed capacities
- 15, 30, 50, 63, 80, 100, 125, 150, 200, 250, 315, 400, 500, 630, 800, 1000, 1250Based on visible page data; confirm exact value in the RFQ.
- Transport package
- Wooden caseBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cables Busbar And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Meters And Protection Devices categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Switchgear And Breakers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Transformers And Substation Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Ip65 Switchgear Panels sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100 315 Kva Three Phase Copper Wound Oil Immersed Distribution TransformerThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv Distribution Transformers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Electrical Equipment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Cast Resin Dry Type Transformer Ul Certified 10kv Cast Resin And Ul CertifiedThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Dry Type Transformer For Solar Power Systems 100kva And Solar Power SystemsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Epoxy Resin Indoor Electric Single Phase Potential Transformer PtThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Hairui S11 Three-Phase Sealed Oil-Immersed Distribution TransformerRequest Quote
S11/S13 Three-Phase Oil-Immersed Distribution Transformer, 30–2500 kVARequest Quote
Three-Phase 13.8 kV 1000 kVA Oil-Immersed Pad-Mounted Distribution TransformerRequest Quote
700 kVA 11 kV/420 V Three-Phase Oil-Immersed Distribution TransformerRequest Quote
Three-Phase Hermetically Sealed Oil-Immersed Distribution Transformer, 500–2500 kVA, 6–35 kVRequest Quote
S13 Three-Phase Hermetically Sealed Oil-Immersed Distribution Transformer, 6.6–11 kVRequest QuotePowerGridSource related sourcing paths
PowerGridSource procurement phrases
PowerGridSource related product samples
Split core current transformer LMZK1-10 series LMZK series split-core current transformers are suitable for the current ...
Distribution Transformers 150kVA 20kv Dry Type Transformer with Low Loss CE - Low Loss and CEWhat we can do ? 150kVA 20kV Dry Type Transformer with Low Loss CE We are a professional manufacturer focusing on oil im...
Distribution Transformers Schneider Three Phase Power Frequency Amorphous Core Energy Saving Compact Substation - Three PhaseWhat we can do ? We are a professional manufacturer focusing on oil immersed power & distribution transformers with volt...
Distribution Transformers 630kVA 35kv Dry Type Transformer with UL - 630kVA and 35kv Dry Type TransformerWhat we can do ? 150kVA 0.4kV Dry Type Transformer with High Efficiency ISO We are a professional manufacturer focusing ...
Distribution Transformers 100kVA 10kv Dry Type Transformer for Solar Power Systems - 100kVA and Solar Power SystemsWhat we can do ? 100kVA 10kV Dry Type Transformer for Solar Power Systems We are a professional manufacturer focusing on...
Distribution Transformers High Precision Residual Current Transformer for Smart Meters - High Accuracy Transformer and Smart EThe residual current transformer is mainly used to detect all devices in the distribution circuit that pass through the ...