RTU560 product line | Hitachi Energy | RFQ Sourcing Details

RTU560 product line Superior scalability for grid automation and control Substation automation product for transmission and sub-transmission. RTU560 represents high-end network interfacing - offering maximum flexibility with the highest number of supported protocols for sub and host communications.

Designed to handle the highly complex systems in grid automation and control interfacing. RTU560 connects to all kinds of IEDs, parallel I/Os, serial connected and communication via IEC 61850.

All this real time data can then be transmitted to your central SCADA systems for critical actions - protecting your primary equipment from overloading of the grid. Optimize your investments with our long life cycle policy and benefit from our agile migration concepts.

Your Benefits: Adaptability to changing conditions in your network Secure flexibility with our modular platform that allows hot swap depending on your requirements Precise data handling gives you peace-of-mind Superior performance with up to 16 CMUs enables mass data handling Experience of more than 40 years in substation automation make RTU560 a secure investment for you Our agile migration concept saves your money and time Application Example Application Area Application Explorer In complex network environments you are challenged by a large amount of data.

Our RTU560 is the perfect solution for various applications for automation and control. The migration solution allows you to retrofit your secondary equipment with reduced investment.

The combination of parallel wired I/Os, serial links and IEC 61850 is efficiently feasible with our RTU560 allowing you to work with infrastructures from different generations Our flexible redundancy concepts provide high availability where you need it Transmission network substations Automation of transmission substation Digital substation Migration Electrical distribution network, primary substation Automation of primary substation Transformer automation and control Application RTU530 RTU560 Ring main units ■ Pole-top RTUs ■ Capacitor banks ■ Demand response ■ Fault detection isolation restoration ■ Voltage optimization ■ Decentralized energy resources ■ Substation automation ■ ■ Gateway ■ Wellhead automation ■ ■ Pipeline supervision ■ Monitoring and control of pumping stations ■ Monitoring and control of lift stations ■ Monitoring and control of water reservoirs ■ Get to know more Communication units RTU560 product line increases availability with a flexible redundancy concept which is suitable for all types of redundant requirements.

Redundant communication units can be replaced even during operation, ensuring a reliable system. 560CMR01 – Communication Unit Central module of the RTU560 with ARM based platform 2x serial communication interfaces (RS-232 or RS-485) for local/remote communication 2x Ethernet interface (10/100.

BaseT) SD card with licenses and functions adaptable to customer requirements 1 x Micro-USB interface for webserver access 560CMR02 - Communication unit 2x ETH, 6 serial (RS232/485) USB interface for Webserver access Powerful CMU platform (factor 3-4) Considerable memory (128 MB) Power supply units RTU560 product line increases availability with a flexible redundancy concept which is suitable for all types of redundant requirements.

Redundant power supplies can be replaced even during operation, ensuring a reliable system.

560PSR00 Input voltage 24...60 V DC Output voltage: 5 and 24 V DC Suitable for redundant power supply in 560MPR03/560SFR02 560PSU01 Input voltage V DC Output voltage: 5 and 24 V DC Suitable for redundant power supply in 560MPR03/560SFR02 Input/output modules Binary input/output modules 23BE40 - Binary input, 16 channels Allocation of an input signal to a processing function can be done according to the rules of configuration.

16 channel potential isolated inputs, without common return Process voltage: V DC and V DC 560BIR01 - Binary input, 16 channels, LED's Binary input module 560BIR01 R1: 24...60VDC R2: 110/125VDC 24...60 VDC and support of 110/125 VDC process voltage in rack mounting 560BOR01 - Binary output, 16 channels To be used for control of 16 binary process signals using relay .

16 relay , 2 groups of 8 outputs with common return Max. switching voltage: 150 V DC Max.

breaking current: 2 A @ 60 V DC Analog input/output modules 23AA21 - Analog output, 2 channels with potential isolation Via the analog output board 23AA21 analog control outputs for sequential or closed loop control, display instruments, measurand recorders etc. can be connected to the RTU560.

Analog signal represented digitally by 11 bit + sign Selectable current outputs: +/-2.5 mA;+/-5 mA;+/-10 mA;+/-20 mA;+4...20 mA 560AIR01 - Analog input, 8 channels The 560AIR01 module records up to 8 analog measured values.

The module 560AIR01 is able to process the following types of signals: Analog measured values (AMI) Measured floating point information (MFI) AD converter resolution: 16 bit Measuring ranges: +/-2 mA;+/-5 mA;+/-10 mA;+/-20 mA;+/-40 mA;+/-2 V DC;0...20 V DC 560AIR02 - Analog input, 8 channels The 560AIR02 module records up to 8 analog measured values.

The module 560AIR02 is able to process the following types of signals: Analog measured values (AMI) Measured floating point information (MFI) AD converter resolution: 16 bit Measuring ranges: +/-2 mA;+/-5 mA;+/-10 mA;+/-20 mA;+/-40 mA Command output modules 23BA23 - Command output monitoring (1 out of n) check The 23BA23 board is intended for use in the RTU560 product line.

The 23BA23 board should be installed if the output circuit of an object command has to be checked before the actual command is given.

Two test and switching circuits Auxiliary test voltage 24...60 V DC 23BA40 - Command output module The 23BA40 can be used for the following types of signal: object commands with single or double , regulation commands, digital set points, bitstring output, 1, 2 or 16 bit. 16 output ...220 V DC / 250 V AC Max.

switching capacity: 120 W (DC) Max. switching current: 300 mA at 110 V DC, 200 mA at 220 V DC (L/R = 40 ms) Isolated relay output , 2-pole connection Serial communication 23OK24 - Fibre optic coupler for 2 glass-fibre optic lines Fibre optic coupler for glass-fibre optic cable with emission wave length of 820 nm.

Fiber optic connection with bayonet socket BFOC/2.5 (IEC-SC86B) Optical isolation of RTU560 bus Suitable as star coupler for RS-485 bus and RS-232 bus Interfacing of IEC devices Connector for 2 optical lines on front plate 23WT23 - Modem V.23, power supply 5...24 V DC The 23WT23 board is a modem which converts the serial data according to FSK-channel CCITT V.23 standard.

Therefore it can be used for transmission via leased PTT-lines or private networks.

Voice frequency V DC Voice frequency 200 baud Additional 600 baud and 2400 baud channels Ethernet communication 560NUS04 - Integrated unmanaged switch with 4 ports Fibre optic coupler for glass-fibre optic cable with emission wave length of 820 nm.

Fiber optic connection with bayonet socket BFOC/2.5 (IEC-SC86B) Unmanaged switch 4x 10/100 BaseT port (electrical) Linear network structure supported Can be used with rack types 560MPR01, 560MPR03, 560SFR02.

560NUS12 - Integrated unmanaged switch with 2 SFP slots Unmanaged switch 2x SFP slot, without optical transmitter/receiver Additional SFP modules are required (see 560NFOxx) 2x 10/100 BaseT port (electrical) Linear network structure supported 560NMS34 - Integrated managed switch with 1 SDSL-port and 4 Ethernet ports Integrated managed layer-2-switch 4x 1