2500 kVA 10 kV Three-Phase Oil-Immersed Step-Down | RFQ Sourcing Details
Pad Mounted Transformers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Pad Mounted Transformers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This 2500 kVA three-phase oil-immersed transformer is designed for voltage conversion and electrical power distribution. The listed configuration uses a core-type, two-winding construction and supports step-down service from a 10 kV high-voltage side.
The product information identifies copper or aluminum winding options and Dyn11 or Yyn0 connection-group options. For the 2500 kVA model, the published parameter table lists 2310 W no-load loss, 23000 W load loss, 0.7% no-load current, and 5% short-circuit impedance.
The broader product range lists high-voltage selections including 6 kV, 6.3 kV, 10 kV, 10.5 kV, 11 kV, 20 kV, and 35 kV, with low-voltage selections including 0.4 kV, 400 V, 415 V, and 0.69 kV. These options should not be assumed to apply to the ordered unit until the final electrical schedule is confirmed.
The described construction includes cold-rolled grain-oriented silicon-steel core sheets, vacuum drying of coils and cores, vacuum-filtered oil filling, and a corrugated oil tank intended to accommodate oil-volume changes caused by temperature variation.
Pressure-relief valves and glass thermometer sockets are listed, while alarm terminals and gas relays are described as optional. Procurement confirmation is essential because dimensions and weight vary by capacity and design, and customization is available.
Before ordering, the buyer should approve the exact primary and secondary voltages, tap range, vector group, winding conductor, frequency, cooling arrangement, enclosure and mounting configuration, accessory package, applicable standard and certification documentation, routine and type-test requirements, guaranteed loss tolerances, installation environment, terminal arrangement, outline drawing, total filled weight, oil specification, packaging, inspection plan, delivery schedule, and warranty terms.
The listing includes a package-size entry and gross weight, but their units or applicability should be checked against the final 2500 kVA design and approved drawing.
2500 | Applications and Buyer Notes
2500 is organized as a sourcing-ready Pad Mounted Transformers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Pad Mounted TransformersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Phase
- Three-phaseBased on visible page data; confirm exact value in the RFQ.
- Function
- Step-down power distributionBased on visible page data; confirm exact value in the RFQ.
- Load loss
- 23000 W for the listed 2500 kVA modelBased on visible page data; confirm exact value in the RFQ.
- No-load loss
- 2310 W for the listed 2500 kVA modelBased on visible page data; confirm exact value in the RFQ.
- Customization
- AvailableBased on visible page data; confirm exact value in the RFQ.
- Rated capacity
- 2500 kVABased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cables Busbar And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Meters And Protection Devices categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Switchgear And Breakers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Transformers And Substation Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Ip65 Switchgear Panels sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100 315 Kva Three Phase Copper Wound Oil Immersed Distribution TransformerThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv Distribution Transformers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Electrical Equipment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Cast Resin Dry Type Transformer Ul Certified 10kv Cast Resin And Ul CertifiedThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Dry Type Transformer For Solar Power Systems 100kva And Solar Power SystemsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Epoxy Resin Indoor Electric Single Phase Potential Transformer PtThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Peng Tai S11/S13 Customizable Oil-Immersed Distribution Transformer, 30–2500 kVARequest Quote
630 kVA Three-Phase Oil-Immersed Pad-Mounted Transformer, 50/60 HzRequest Quote
1000kVA 2000kVA Large Capacity Good Quality Plants Oil Immersed Power Transformer Used DistributionRequest Quote
13.8 kV 750 kVA Three-Phase Pad-Mounted Transformer, 480Y/277 V SecondaryRequest Quote
Three-Phase Ester-Oil Pad-Mounted Transformer, 5–10 MVA, Up to 34.5 kVRequest Quote
Customizable S11-M Hermetically Sealed Oil-Immersed Pad-Mounted Power TransformerRequest QuotePowerGridSource related sourcing paths
PowerGridSource procurement phrases
PowerGridSource related product samples
DJB-426 6 Phase Relay Test Kit-199 "microcomputer relay protection test device technology", list
Transformers and Substation Equipment 66kv 35kv 20kv 11kv Combined Transformer Substation Package CompactIntroduction: The needs of the wind power plant developed a special combination of a series of wind power substation, th...
Transformers and Substation Equipment 30kVA 50kVA 63kVA 80kVA 100kVA 10kv 33kv Zgs American Prefabricated Compact Substation - SubstationThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment American Type Outdoor Usage Combined Power Transformer Box Substation - Substation and Electrical EqThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment Substation Cable Junction Plug Terminal Joint Electrical Equipment for Power Substation Price - SubsThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment 132kv 11.5kv 25mvaOutdoor,dust and water proof-phase,two-pole,vertical break