Peng Tai S11/S13 Customizable Oil-Immersed Distri | RFQ Sourcing Details
Pad Mounted Transformers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Pad Mounted Transformers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This customizable oil-immersed transformer is offered for power and distribution duties in ratings from 30 to 2500 kVA. The listed model range includes S11-M-30 through S11-M-2500, with S13 variants also referenced. Supported connection-group options are Yyn0 and Dyn11.
The technical table specifies 6, 6.3, 10, 10.5, or 11 kV high-voltage configurations with a 0.4 kV low-voltage side and tap ranges of ±5% or ±2 × 2.5%. The described fully sealed design uses a corrugated oil tank rather than a separate oil conservator.
Oil-volume changes are accommodated by the corrugated tank structure, while the transformer oil is isolated from outside air. Construction details state that the low-voltage winding uses copper foil winding or a layer structure and that the high-voltage winding uses a multilayer cylindrical structure.
The coil and core are vacuum-dried, followed by vacuum oil injection. Anti-loosening fasteners and a non-hanging body structure are also described. Published model data varies by rating. Listed no-load loss runs from 100 W for the 30 kVA model to 2290 W for the 2500 kVA model.
Listed load loss ranges from 600/630 W at 30 kVA to 21,200 W at 2500 kVA, depending on the stated connection column. No-load current values range from 1.5% to 0.4%, while short-circuit impedance is listed as 4%, 4.5%, or 5% according to capacity.
Procurement note: the headline references 12.47, 23, and 35 kV and describes the product as pad mounted, but the detailed technical table covers 6–11 kV high-voltage configurations and does not define a pad-mounted enclosure arrangement.
Buyers should therefore obtain an approved datasheet and drawings for the exact requested unit before ordering.
Confirm phase, rated primary and secondary voltages, capacity, frequency, connection group, tap range, loss limits, impedance, enclosure or mounting arrangement, accessories, applicable certification, testing requirements, and package dimensions.
Also confirm whether the required configuration is covered by the stated standard models or requires a custom design.
Peng | Applications and Buyer Notes
Peng is organized as a sourcing-ready Pad Mounted Transformers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Pad Mounted TransformersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Low voltage
- 0.4 kVBased on visible page data; confirm exact value in the RFQ.
- Cooling/type
- Oil-immersed, fully sealed design describedBased on visible page data; confirm exact value in the RFQ.
- No-load loss
- 100–2290 W, model-dependentBased on visible page data; confirm exact value in the RFQ.
- Product type
- Customizable oil-immersed transformerBased on visible page data; confirm exact value in the RFQ.
- Customization
- OEM, ODM, specification, and logo customization listedBased on visible page data; confirm exact value in the RFQ.
- Rated capacity
- 30–2500 kVABased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cables Busbar And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Meters And Protection Devices categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Switchgear And Breakers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Transformers And Substation Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Ip65 Switchgear Panels sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100 315 Kva Three Phase Copper Wound Oil Immersed Distribution TransformerThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv Distribution Transformers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Electrical Equipment Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Cast Resin Dry Type Transformer Ul Certified 10kv Cast Resin And Ul CertifiedThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Dry Type Transformer For Solar Power Systems 100kva And Solar Power SystemsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Epoxy Resin Indoor Electric Single Phase Potential Transformer PtThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
2500 kVA 10 kV Three-Phase Oil-Immersed Step-Down Distribution TransformerRequest Quote
Customizable S11-M Hermetically Sealed Oil-Immersed Pad-Mounted Power TransformerRequest Quote
1000kVA 2000kVA Large Capacity Good Quality Plants Oil Immersed Power Transformer Used DistributionRequest Quote
630 kVA Three-Phase Oil-Immersed Pad-Mounted Transformer, 50/60 HzRequest Quote
1500kVA Oil-Filled Pad-Mounted Transformer for Shopping Mall Power DistributionRequest Quote
Three-Phase Ester-Oil Pad-Mounted Transformer, 5–10 MVA, Up to 34.5 kVRequest QuotePowerGridSource related sourcing paths
Transformers and Substation Equipment
PowerGridSource procurement phrases
PowerGridSource related product samples
DJB-426 6 Phase Relay Test Kit-199 "microcomputer relay protection test device technology", list
Transformers and Substation Equipment 66kv 35kv 20kv 11kv Combined Transformer Substation Package CompactIntroduction: The needs of the wind power plant developed a special combination of a series of wind power substation, th...
Transformers and Substation Equipment 30kVA 50kVA 63kVA 80kVA 100kVA 10kv 33kv Zgs American Prefabricated Compact Substation - SubstationThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment American Type Outdoor Usage Combined Power Transformer Box Substation - Substation and Electrical EqThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment Substation Cable Junction Plug Terminal Joint Electrical Equipment for Power Substation Price - SubsThis product is to absorb the latest foreign advanced technology, combined with the actual situation of domestic researc...
Transformers and Substation Equipment 132kv 11.5kv 25mvaOutdoor,dust and water proof-phase,two-pole,vertical break