5 MVA Three-Phase Outdoor Pad-Mounted Distributio | RFQ Sourcing Details
Distribution Transformers · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Product specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Distribution Transformers. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
This 5 MVA three-phase pad-mounted distribution transformer is intended for outdoor power-distribution installations. It uses a core-type, two-winding, oil-immersed design with ONAN cooling in PCB-free mineral oil.
The supplied information identifies IEC 60076 and IEEE standards as reference standards and describes the transformer as UL listed. Published electrical details include 50 or 60 Hz operation, a 4% impedance value, Dyn1 connection, and an off-load tap changer with a ±2 × 2.5% tapping range on the high-voltage side.
Listed high-voltage ratings include 13.2 kV, 13.8 kV, 22 kV, 34.5 kV, and 40.5 kV, although a separate technical table lists a different voltage subset. The low-voltage rating is stated as 415 V or customizable. Aluminum or copper winding options and a silicon-steel core are offered.
The stated oil and winding temperature rises are 60°C and 65°C, respectively. The product is presented for pad-mounted power and distribution service, with customization available.
Published capacity information covers multiple ratings, including 1.5, 2, 2.5, 3, and 5 MVA, while the broader product range is stated to extend up to 10 MVA. Before procurement, confirm the exact approved datasheet for the 5 MVA configuration.
Buyers should reconcile the high-voltage options shown in the different specification sections and verify the required primary and secondary voltages, frequency, vector group, impedance, tap range, winding conductor, insulation system, cooling fluid, temperature-rise limits, and applicable reference-standard edition.
Request configuration-specific evidence for the UL listing and any other required certification, since the supplied information also references certifications and reports that may cover other transformer types.
Also confirm enclosure construction and rating, terminal arrangement, protection accessories, losses, sound level, dimensions, operating weight, foundation requirements, cable-entry details, testing scope, documentation, delivery schedule, warranty, and installation conditions before issuing a purchase order.
MVA | Applications and Buyer Notes
MVA is organized as a sourcing-ready Distribution Transformers reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Distribution TransformersBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Phase
- Three phaseBased on visible page data; confirm exact value in the RFQ.
- Frequency
- 50 Hz or 60 HzBased on visible page data; confirm exact value in the RFQ.
- Impedance
- 4%Based on visible page data; confirm exact value in the RFQ.
- Tap changer
- Off-load tap changer, ±2 × 2.5% on HV sideBased on visible page data; confirm exact value in the RFQ.
- Installation
- OutdoorBased on visible page data; confirm exact value in the RFQ.
- Product type
- Pad-mounted distribution transformerBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 100kva 10kv Dry Type Transformer For Solar Power Systems 100kva And Solar Power SystemsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Epoxy Resin Indoor Electric Single Phase Potential Transformer PtThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10kv Power Supply Ring Main Unit Cable Accessories Ceramic Metal Silicone Rubber Epoxy Resin BushingThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 10p10 500 5a Split Core Ct Current TransformerThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv 12kv 20kv 24kv Electrical Power Transmission Medium Voltage Air Insulated SwitchgearThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv 12kv Medium Voltage Distribution Air Insulated SwitchgearThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 11kv 12kv Medium Voltage Sis Solid Insulation Compact Modular SwitchgearThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 150kva 20kv Dry Type Transformer With Low Loss Ce Low Loss And CeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 23kv Oil Filled Ansi Standard Power Transformer Bay O Net B O N Inline Link Auto Electrical ThermaThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cables Busbar And Accessories categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Meters And Protection Devices categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Switchgear And Breakers categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Transformers And Substation Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
34.5 kV/0.418 kV 2500 kVA Three-Phase Pad-Mounted Oil-Immersed Distribution TransformerRequest Quote
S11/S13 Three-Phase Oil-Immersed Distribution Transformer, 30–2500 kVARequest Quote
100–315 kVA Three-Phase Copper-Wound Oil-Immersed Distribution TransformerRequest Quote
PEC-S-5000/35/0.4 5000 kVA Three-Phase Cast Resin Dry-Type Distribution TransformerRequest Quote
Sz22-20000/ kVA 38.5kv Three Phase Oil Immersed on Load Tap Changing Power Transformer OnanRequest Quote
Three-Phase Reclosing for Outdoor ApplicationsRequest QuotePowerGridSource related sourcing paths
PowerGridSource procurement phrases
PowerGridSource related product samples
Split core current transformer LMZK1-10 series LMZK series split-core current transformers are suitable for the current ...
Distribution Transformers 150kVA 20kv Dry Type Transformer with Low Loss CE - Low Loss and CEWhat we can do ? 150kVA 20kV Dry Type Transformer with Low Loss CE We are a professional manufacturer focusing on oil im...
Distribution Transformers Schneider Three Phase Power Frequency Amorphous Core Energy Saving Compact Substation - Three PhaseWhat we can do ? We are a professional manufacturer focusing on oil immersed power & distribution transformers with volt...
Distribution Transformers 630kVA 35kv Dry Type Transformer with UL - 630kVA and 35kv Dry Type TransformerWhat we can do ? 150kVA 0.4kV Dry Type Transformer with High Efficiency ISO We are a professional manufacturer focusing ...
Distribution Transformers 100kVA 10kv Dry Type Transformer for Solar Power Systems - 100kVA and Solar Power SystemsWhat we can do ? 100kVA 10kV Dry Type Transformer for Solar Power Systems We are a professional manufacturer focusing on...
Distribution Transformers High Precision Residual Current Transformer for Smart Meters - High Accuracy Transformer and Smart EThe residual current transformer is mainly used to detect all devices in the distribution circuit that pass through the ...