Impulse Generator Lightning Impulse Withstand Vol | RFQ Sourcing Details

General Provisions 1. This parameter is applicable to 6-10KV grade switches and insulators;And the full wave test of lightning impulse voltage of transformer and transformer without cut wave test requirement.

2.This set of equipment meets the current international standards, national standards and related industry standards.

Compliant standards GB311.1 Insulation coordination of high voltage power transmission and transformation equipment GB/T16927.1 High voltage test technology General test requirements GB/T16927.2 High voltage test technology measurement system GB/T16896.1 Digital recorder for high voltage shock test ZB F24001-90 Implementation Rules for impulse voltage measurement GB191 packing mark GB4208 enclosure protection class GB813-89 shock test oscilloscope and peak meter Conditions of use The impulse voltage generator test system device is mainly suitable for 6-10KV grade switches and insulators;The full wave test of lightning impulse voltage of transformer and transformer can also be used for impact test of other products.

1 The altitude shall not exceed 1500m 2 Ambient temperature: -15~+50 3 Air relative humidity: ≤90% 4 Installation location: indoor use, movable 5 There must be a reliable ground point with a ground resistance ≤0.5Ω Technical parameter Nominal lightning wave impulse voltage 200kV Nominal capacity (energy) 10kJ Capacitance 1.0μF,100kV dry fully insulated package Level voltage 100kV Stage capacity 4/5kJ Output waveform 1.2μs/±30%/50μs±20% standard lightning impulse voltage full wave Synchronization Range Greater than 20% Use duration It can work continuously when the rated operating voltage is less than 80%.

It can work intermittently when the rated working voltage is greater than 80%. Amplitude adjustment error voltage difference is less than 1% The minimum output voltage is less than 10% of the device nominal voltage Synchronization error Rate Less than 1% Main configured devices 1.

Rectifier charging power supply (integrated with impact body) Model: KDLGR-100/100 Rated voltage: Un = ±100kV DC (positive or negative polarity) Rated current: In = 100mA (rated voltage) Voltage control: automatic polarity regulation, voltage regulation range 0 ~ 100% Un Polarity conversion: Can change the direction of the high voltage silicon pile Input voltage: 220V two-phase voltage Power frequency: 50/60 Hz Power consumption: about 5kVA 2.

Wea